Water-filled Footrest

Function:

Water stored inside the footrest adds weight to the lower bow, minimizing yaw and pitching during paddling. With less drag than a bow-mounted skeg, it delivers smoother and more efficient forward motion.

Water-filling Procedure:

1.Submerge the footrest in the water to scoop water inside.If the water level is low, use the paddle to assist.

2.Use the markings inside the footrest to estimate the desired water volume.

3.Fold and seal the end of the footrest.

4.Lay the footrest flat with the base of the hose at a relatively higher point.
Open the hose valve to release air. When the water level in the transparent hose exceeds approximately one-third of the hose height, close the valve.

5.Fold the end portion again and secure it tightly.

6.Place the footrest at the very front of the hull, pressing it firmly in place to serve as both ballast and a foot support.

The tail end of the water-filled footrest must be folded at least four times to ensure a proper seal.

Air should be released through the upper hose as completely as possible. If air is not removed, the water inside the footrest may slosh, which can significantly reduce stability.

Excess air inside the footrest may also increase the risk of ballast water leakage.